Skip to content
Bambu Bar
Download
Bambu Bar

Verified printer

Your Bambu Lab X1E, in the menu bar.

The X1E heats its chamber up to 60 °C. Bambu Bar shows the chamber's target next to its reading, so you can see an engineering print warm up.

Download for macOSVerified on hardware
Bambu Lab X1E render

What Bambu Bar shows for the X1E

  • Progress, layers, time left and finish time
  • Nozzle temperature (up to 320 °C)
  • Bed temperature (up to 110 °C)
  • Chamber temperature and its heater target (up to 60 °C)
  • AMS spools by colour name, grams left and humidity
  • Chamber light switch
  • Part, aux and chamber fans
  • Door open warning
  • Pause, resume, stop and print speed (LAN Only + Developer Mode)
  • Printer errors (HMS) in plain words, in Bambu Lab's own translations, with a link to the wiki

X1E at a glance

Chamber
Heated, up to 60 °C
Build volume
256 × 256 × 250 mm
Nozzles
1 · up to 320 °C
Bed
Up to 110 °C
Filament
AMS, AMS 2 Pro, AMS HT
Chamber light
Yes, switchable from the panel

Connect your X1E in three steps

  1. 1. Download Bambu Bar and open it. It lists the printers it finds on your network.
  2. 2. Pick your X1E. The access code fills itself in from Bambu Studio or OrcaSlicer, or read it on the printer under Settings → Network.
  3. 3. Click Connect. For pause, stop and speed, switch the printer to LAN Only with Developer Mode on.

Other printers