Verified printer
Your Bambu Lab H2D, in the menu bar.
The wide, dual-nozzle H2D gets its own model. Bambu Bar shows both nozzles and which is printing, the heated chamber's target, and every AMS unit.
Download for macOSVerified on hardware
What Bambu Bar shows for the H2D
- Progress, layers, time left and finish time
- Both nozzles, and which one is printing
- Bed temperature (up to 120 °C)
- Chamber temperature and its heater target (up to 65 °C)
- AMS spools by colour name, grams left and humidity
- Chamber light switch
- Part, aux and chamber fans
- Door open warning
- Pause, resume, stop and print speed (LAN Only + Developer Mode)
- Printer errors (HMS) in plain words, in Bambu Lab's own translations, with a link to the wiki
H2D at a glance
- Chamber
- Heated, up to 65 °C
- Build volume
- 350 × 320 × 325 mm
- Nozzles
- 2 · up to 350 °C
- Bed
- Up to 120 °C
- Filament
- AMS, AMS 2 Pro, AMS HT
- Chamber light
- Yes, switchable from the panel
Connect your H2D in three steps
- 1. Download Bambu Bar and open it. It lists the printers it finds on your network.
- 2. Pick your H2D. The access code fills itself in from Bambu Studio or OrcaSlicer, or read it on the printer under Settings → Network.
- 3. Click Connect. For pause, stop and speed, switch the printer to LAN Only with Developer Mode on.