Verified printer
Your Bambu Lab A1, in the menu bar.
The A1's arch and AMS Lite get their own 3D model. Bambu Bar shows the job, nozzle and bed, and the four AMS Lite spools by colour name and grams left; no chamber light or door to show.
Download for macOSVerified on hardware
What Bambu Bar shows for the A1
- Progress, layers, time left and finish time
- Nozzle temperature (up to 300 °C)
- Bed temperature (up to 100 °C)
- AMS Lite spools by colour name, with grams left
- Part cooling fan
- Pause, resume, stop and print speed (LAN Only + Developer Mode)
- Printer errors (HMS) in plain words, in Bambu Lab's own translations, with a link to the wiki
A1 at a glance
- Chamber
- Open frame
- Build volume
- 256 × 256 × 256 mm
- Nozzles
- 1 · up to 300 °C
- Bed
- Up to 100 °C
- Filament
- AMS Lite
- Chamber light
- None on this model
Connect your A1 in three steps
- 1. Download Bambu Bar and open it. It lists the printers it finds on your network.
- 2. Pick your A1. The access code fills itself in from Bambu Studio or OrcaSlicer, or read it on the printer under Settings → Network.
- 3. Click Connect. For pause, stop and speed, switch the printer to LAN Only with Developer Mode on.