---
title: "Bambu Lab X2D monitor for Mac: Bambu Bar"
description: "See your Bambu Lab X2D's progress, temperatures and filament in the Mac menu bar."
url: https://bambubar.app/printers/x2d
---

# Bambu Lab X2D in your Mac menu bar

Two nozzles and a heated chamber up to 65 °C: Bambu Bar shows both hotends, which one is printing, and the chamber's target.

**Status:** verified on hardware

## What Bambu Bar shows for the X2D

- Progress, layers, time left and finish time
- Both nozzles, and which one is printing
- Bed temperature (up to 120 °C)
- Chamber temperature and its heater target (up to 65 °C)
- AMS spools by colour name, grams left and humidity
- Chamber light switch
- Part, aux and chamber fans
- Door open warning
- Pause, resume, stop and print speed (LAN Only + Developer Mode)
- Printer errors (HMS) in plain words, in Bambu Lab's own translations, with a link to the wiki

## X2D at a glance

| | |
| --- | --- |
| Chamber | Heated, up to 65 °C |
| Build volume | 256 × 256 × 261 mm |
| Nozzles | 2 (up to 300 °C) |
| Bed | up to 120 °C |
| Filament system | AMS |

## Set up

1. [Download Bambu Bar](https://bambubar.app/download) and open it.
2. Pick your X2D from the printers found on your network.
3. The access code fills itself in from Bambu Studio or OrcaSlicer, or read it on the printer under Settings → Network.

Controls (pause, resume, stop, speed) need the printer in LAN Only mode with Developer Mode on; status works in any mode.

[All compatible printers](https://bambubar.app/printers)