---
title: "Bambu Lab X1E monitor for Mac: Bambu Bar"
description: "See your Bambu Lab X1E's progress, temperatures and filament in the Mac menu bar."
url: https://bambubar.app/printers/x1e
---

# Bambu Lab X1E in your Mac menu bar

The X1E heats its chamber up to 60 °C. Bambu Bar shows the chamber's target next to its reading, so you can see an engineering print warm up.

**Status:** verified on hardware

## What Bambu Bar shows for the X1E

- Progress, layers, time left and finish time
- Nozzle temperature (up to 320 °C)
- Bed temperature (up to 110 °C)
- Chamber temperature and its heater target (up to 60 °C)
- AMS spools by colour name, grams left and humidity
- Chamber light switch
- Part, aux and chamber fans
- Door open warning
- Pause, resume, stop and print speed (LAN Only + Developer Mode)
- Printer errors (HMS) in plain words, in Bambu Lab's own translations, with a link to the wiki

## X1E at a glance

| | |
| --- | --- |
| Chamber | Heated, up to 60 °C |
| Build volume | 256 × 256 × 250 mm |
| Nozzles | 1 (up to 320 °C) |
| Bed | up to 110 °C |
| Filament system | AMS |

## Set up

1. [Download Bambu Bar](https://bambubar.app/download) and open it.
2. Pick your X1E from the printers found on your network.
3. The access code fills itself in from Bambu Studio or OrcaSlicer, or read it on the printer under Settings → Network.

Controls (pause, resume, stop, speed) need the printer in LAN Only mode with Developer Mode on; status works in any mode.

[All compatible printers](https://bambubar.app/printers)