---
title: "Bambu Lab H2C monitor for Mac: Bambu Bar"
description: "See your Bambu Lab H2C's progress, temperatures and filament in the Mac menu bar."
url: https://bambubar.app/printers/h2c
---

# Bambu Lab H2C in your Mac menu bar

The H2C's two hotends, heated chamber and AMS units, live in the menu bar.

**Status:** verified on hardware

## What Bambu Bar shows for the H2C

- Progress, layers, time left and finish time
- Both nozzles, and which one is printing
- Bed temperature (up to 120 °C)
- Chamber temperature and its heater target (up to 65 °C)
- AMS spools by colour name, grams left and humidity
- Chamber light switch
- Part, aux and chamber fans
- Door open warning
- Pause, resume, stop and print speed (LAN Only + Developer Mode)
- Printer errors (HMS) in plain words, in Bambu Lab's own translations, with a link to the wiki

## H2C at a glance

| | |
| --- | --- |
| Chamber | Heated, up to 65 °C |
| Build volume | 330 × 320 × 325 mm |
| Nozzles | 2 (up to 350 °C) |
| Bed | up to 120 °C |
| Filament system | AMS |

## Set up

1. [Download Bambu Bar](https://bambubar.app/download) and open it.
2. Pick your H2C from the printers found on your network.
3. The access code fills itself in from Bambu Studio or OrcaSlicer, or read it on the printer under Settings → Network.

Controls (pause, resume, stop, speed) need the printer in LAN Only mode with Developer Mode on; status works in any mode.

[All compatible printers](https://bambubar.app/printers)